Clock-audio CAP 002 Phantom power User Manual download pdf

CAP002 Phantom power adapter

Phantom power adapter operation

The CAP002 can be used as a phantom power adapter which will step down the phantom power

Voltage developed by your mixer or other device (typically 48 V) to a 9 Volt level required by a

condenser microphone. This Voltage is then passed through the microphone cable to your

microphone. No separate power connections to CAP002 are required. It will be necessary to lift and

move the red jumpers on the headers "JP1" and "JP2" on the circuit board should be repositioned

from "B" to "A", and the resistor R5 changed to 100K (1/4 Watt).

1 2

Page 1

CAP002 Phantom power adapter Phantom power adapter operation The CAP002 can be used as a phantom power adapter which will step down the

Microphone cable Connections Connect your mic input to the PL2 screw terminals: Connect Phase cold (-) to pin 4. Connect phase hot (+) to pin 3

No comments

Clock-audio CAP 002 Phantom power User Manual